Biophysical characterization and design of a minimal version of the Hoechst RNA aptamer.

RNA aptamers are oligonucleotides, selected through Systematic Evolution of Ligands by EXponential Enrichment (SELEX), that can bind to specific target molecules with high affinity. One such molecule is the RNA aptamer that binds to a blue-fluorescent Hoechst dye that was modified with bulky t-Bu groups to prevent non-specific binding to DNA. This aptamer has potential for biosensor applications; however, limited information is available regarding its conformation, molecular interactions with the ligand, and binding mechanism. The study presented here aims to biophysically characterize the Hoechst RNA aptamer when complexed with the t-Bu Hoechst dye and to further optimize the RNA sequence by designing and synthesizing new sequence variants. Each variant aptamer-t-Bu Hoechst complex was evaluated through a combination of fluorescence emission, native polyacrylamide gel electrophoresis, fluorescence titration, and isothermal titration calorimetry experiments. The results were used to design a minimal version of the aptamer consisting of only 21 nucleotides. The performed study also describes a more efficient method for synthesizing the t-Bu Hoechst dye derivative. Understanding the biophysical properties of the t-Bu Hoechst dye-RNA complex lays the foundation for nuclear magnetic resonance spectroscopy studies and its potential development as a building block for an aptamer-based biosensor that can be used in medical, environmental or laboratory settings.

Isothermal titration calorimetry and surface plasmon resonance methods to probe protein-protein interactions.

Isothermal titration calorimetry (ITC) and surface plasmon resonance (SPR) are two commonly used methods to probe biomolecular interactions. ITC can provide information about the binding affinity, stoichiometry, changes in Gibbs free energy, enthalpy, entropy, and heat capacity upon binding. SPR can provide information about the association and dissociation kinetics, binding affinity, and stoichiometry. Both methods can determine the nature of protein-protein interactions and help understand the physicochemical principles underlying complex biochemical pathways and communication networks. This methods article discusses the practical knowledge of how to set up and troubleshoot these two experiments with some examples.

Investigation of steric hindrance effect on the interactions between four alkaloids and HSA by isothermal titration calorimetry and molecular docking.

The binding of four alkaloids with human serum albumin (HSA) was investigated by isothermal titration calorimetry (ITC), spectroscopy and molecular docking techniques. The findings demonstrated that theophylline or caffeine can bind to HAS, respectively. The number of binding sites and binding constants are obtained. The binding mode is a static quenching process. The effects of steric hindrance, temperature, salt concentration and buffer solution on the binding indicated that theophylline and HSA have higher binding affinity than caffeine. The fluorescence and ITC results showed that the interaction between HSA and theophylline or caffeine is an entropy-driven spontaneous exothermic process. The hydrophobic force was the primary driving factor. The experimental results were consistent with the molecular docking data. Based on the molecular structures of the four alkaloids, steric hindrance might be a major factor in the binding between HSA and these four alkaloids. This study elucidates the mechanism of interactions between four alkaloids and HSA.

pH-dependent interactions of biologically important metal ions with hen egg white lysozyme based on its hydration properties: Thermodynamic and mechanistic insights.

Importance of metal ion selectivity in biomolecules and their key role in proteins are widely explored. However, understanding the thermodynamics of how hydrated metal ions alter the protein hydration and their conformation is also important. In this study, the interaction of some biologically important Ca2+, Mn2+, Co2+, Cu2+, and Zn2+ ions with hen egg white lysozyme at pH 2.1, 3.0, 4.5 and 7.4 has been investigated. Intrinsic fluorescence studies have been employed for metal ion-induced protein conformational changes analysis. Thermostability based on protein hydration has been investigated using differential scanning calorimetry (DSC). Thermodynamic parameters emphasizing on metal ion-protein binding mechanistic insights have been well discussed using isothermal titration calorimetry (ITC). Overall, these experiments have reported that their interactions are pH-dependent and entropically driven. This research also reports the strongly hydrated metal ions as water structure breaker unlike osmolytes based on DSC studies. These experimental results have highlighted higher concentrations of different metal ions effect on the protein hydration and thermostability which might be helpful in understanding their interactions in aqueous solutions.

Real time detection of pathogenic bacteria in veterinary microbiology using isothermal microcalorimetry - A different approach.

With today's challenges regarding antibiotic resistance and the importance of the implementation of prudent use of antibiotics, fast and reliable diagnostic tools for bacterial infections and subsequent antimicrobial susceptibility testing are of utmost relevance. Isothermal microcalorimetry (IMC) is a broadly applicable method, with which metabolic heat flow in reproducing bacteria can be measured in real time. To the best of the authors' knowledge, this is the first report on examination of 124 urine samples from feline and canine urinary tract infection with an IMC-based prototype instrument. A concentration-dependent time of peak heat flow by dilution series with Escherichia coli and Enterococcus faecalis reference strains demonstrated the general good performance of the prototype for detection of these bacteria. With diagnostic culture being set as a gold standard, the diagnostic sensitivity of IMC compared to bacteriological culture was 80 %, the diagnostic specificity was 97 %. With a Cohens' kappa value (κ) of 0.80, the two methods show good concordance. The results from our study demonstrate that the IMC technology is suitable to allow reliable, but much faster detection of bacteria than conventional culture, especially for Escherichia coli. Thus, implementing IMC technology could markedly speed up the bacteriological diagnostic process in veterinary medicine.

NMR-identification of the interaction between BRCA1 and the intrinsically disordered monomer of the Myc-associated factor X.

The breast cancer susceptibility 1 (BRCA1) protein plays a pivotal role in modulating the transcriptional activity of the vital intrinsically disordered transcription factor MYC. In this regard, mutations of BRCA1 and interruption of its regulatory activity are related to hereditary breast and ovarian cancer (HBOC). Interestingly, so far, MYC's main dimerization partner MAX (MYC-associated factor X) has not been found to bind BRCA1 despite a high sequence similarity between both oncoproteins. Herein, we show that a potential reason for this discrepancy is the heterogeneous conformational space of MAX, which encloses a well-documented folded coiled-coil homodimer as well as a less common intrinsically disordered monomer state-contrary to MYC, which exists mostly as intrinsically disordered protein in the absence of any binding partner. We show that when the intrinsically disordered state of MAX is artificially overpopulated, the binding of MAX to BRCA1 can readily be observed. We characterize this interaction by nuclear magnetic resonance (NMR) spectroscopy chemical shift and relaxation measurements, complemented with ITC and SAXS data. Our results suggest that BRCA1 directly binds the MAX monomer to form a disordered complex. Though probed herein under biomimetic in-vitro conditions, this finding can potentially stimulate new perspectives on the regulatory network around BRCA1 and its involvement in MYC:MAX regulation.

Simulation-guided development of an optical calorimeter for high dose rate dosimetry.

Optical Calorimetry (OC) is based on interferometry and provides a direct measurement of spatially resolved absorbed dose to water by measuring refractive index changes induced by radiation. The purpose of this work was to optimize and characterize in software an OC system tailored for ultra-high dose rate applications and to build and test a prototype in a clinical environment. A radiation dosimeter using the principles of OC was designed in optical modelling software. Traditional image quality instruments, fencepost and contrast phantoms, were utilized both in software and experimentally in a lab environment to investigate noise reduction techniques and to test the spatial and dose resolution of the system. Absolute dose uncertainty was assessed by measurements in a clinical 6 MV Flattening Filter Free (FFF) photon beam with dose rates in the range 0.2-6 Gy/s achieved via changing the distance from the source. Design improvements included: equalizing the pathlengths of the interferometer, isolating the system from external vibrations and controlling the system's internal temperature as well as application of mathematical noise reduction techniques. Simulations showed that these improvements should increase the spatial resolution from 22 to 35 lp/mm and achieve a minimum detectable dose of 0.2 Gy, which was confirmed experimentally. In the FFF beam, the absolute dose uncertainty was dose rate dependent and decreased from 2.5 ± 0.8 to 2.5 ± 0.2 Gy for dose rates of 0.2 and 6 Gy/s, respectively. A radiation dosimeter utilizing the principles of OC was developed and constructed. Optical modelling software and image quality phantoms allowed for iterative testing and refinement. The refined OC system proved capable of measuring absorbed dose to water in a linac generated photon beam. Reduced uncertainty at higher dose rates indicates the potential for OC as a dosimetry system for high dose rate techniques such as microbeam and ultra-high dose-rate radiotherapy.

Bayesian Regression Quantifies Uncertainty of Binding Parameters from Isothermal Titration Calorimetry More Accurately Than Error Propagation.

We compare several different methods to quantify the uncertainty of binding parameters estimated from isothermal titration calorimetry data: the asymptotic standard error from maximum likelihood estimation, error propagation based on a first-order Taylor series expansion, and the Bayesian credible interval. When the methods are applied to simulated experiments and to measurements of Mg(II) binding to EDTA, the asymptotic standard error underestimates the uncertainty in the free energy and enthalpy of binding. Error propagation overestimates the uncertainty for both quantities, except in the simulations, where it underestimates the uncertainty of enthalpy for confidence intervals less than 70%. In both datasets, Bayesian credible intervals are much closer to observed confidence intervals.

Computed Protein-Protein Enthalpy Signatures as a Tool for Identifying Conformation Sampling Problems.

Understanding the thermodynamic signature of protein-peptide binding events is a major challenge in computational chemistry. The complexity generated by both components possessing many degrees of freedom poses a significant issue for methods that attempt to directly compute the enthalpic contribution to binding. Indeed, the prevailing assumption has been that the errors associated with such approaches would be too large for them to be meaningful. Nevertheless, we currently have no indication of how well the present methods would perform in terms of predicting the enthalpy of binding for protein-peptide complexes. To that end, we carefully assembled and curated a set of 11 protein-peptide complexes where there is structural and isothermal titration calorimetry data available and then computed the absolute enthalpy of binding. The initial "out of the box" calculations were, as expected, very modest in terms of agreement with the experiment. However, careful inspection of the outliers allows for the identification of key sampling problems such as distinct conformations of peptide termini not being sampled or suboptimal cofactor parameters. Additional simulations guided by these aspects can lead to a respectable correlation with isothermal titration calorimetry (ITC) experiments (R2 of 0.88 and an RMSE of 1.48 kcal/mol overall). Although one cannot know prospectively whether computed ITC values will be correct or not, this work shows that if experimental ITC data are available, then this in conjunction with computed ITC, can be used as a tool to know if the ensemble being simulated is representative of the true ensemble or not. That is important for allowing the correct interpretation of the detailed dynamics of the system with respect to the measured enthalpy. The results also suggest that computational calorimetry is becoming increasingly feasible. We provide the data set as a resource for the community, which could be used as a benchmark to help further progress in this area.

Tannins Can Have Direct Interactions with Anthelmintics: Investigations by Isothermal Titration Calorimetry.

Plant tannins are known for their anthelmintic and antiparasitic activities and have been increasingly studied to battle the ever-growing problem of anthelmintic resistance. While tannins have been shown to exhibit these activities on their own, one approach would be to use them as complementary nutrients alongside commercial anthelmintics. So far, research on the interactions between tannins and anthelmintics is limited, and few studies have reported both synergistic and antagonistic effects depending on the type of tannin and the method used. These interactions could either strengthen or weaken the efficacy of commercial anthelmintics, especially if tannin-rich diets are combined with anthelmintics used as oral drenches. To study these interactions, a series of hydrolysable tannins (HTs) was selected, and their direct interactions with thiabendazole (TBZ) were evaluated by isothermal titration calorimetry (ITC), which allowed the detection of the exothermic interaction but also the roles and significances of different structural features of HTs in these interactions. Our results show that HTs can have a direct interaction with the benzimidazole anthelmintic TBZ and that the interaction is strengthened by increasing the number of free galloyl groups and the overall molecular flexibility of HTs.

Potential Clinically Relevant Effects of Sialylation on Human Serum AAG-Drug Interactions Assessed by Isothermal Titration Calorimetry: Insight into Pharmacoglycomics?

Human serum alpha-1 acid glycoprotein is an acute-phase plasma protein involved in the binding and transport of many drugs, especially basic and lipophilic substances. It has been reported that the sialic acid groups that terminate the N-glycan chains of alpha-1 acid glycoprotein change in response to certain health conditions and may have a major impact on drug binding to alpha-1 acid glycoprotein. The interaction between native or desialylated alpha-1 acid glycoprotein and four representative drugs-clindamycin, diltiazem, lidocaine, and warfarin-was quantitatively evaluated using isothermal titration calorimetry. The calorimetry assay used here is a convenient and widely used approach to directly measure the amount of heat released or absorbed during the association processes of biomolecules in solution and to quantitatively estimate the thermodynamics of the interaction. The results showed that the binding of drugs with alpha-1 acid glycoprotein were enthalpy-driven exothermic interactions, and the binding affinity was in the range of 10-5-10-6 M. Desialylated alpha-1 acid glycoprotein showed significantly different binding with diltiazem, lidocaine, and warfarin compared with native alpha-1 acid glycoprotein, whereas clindamycin showed no significant difference. Therefore, a different degree of sialylation may result in different binding affinities, and the clinical significance of changes in sialylation or glycosylation of alpha-1 acid glycoprotein in general should not be neglected.

Isothermal titration calorimetry (ITC) as a promising tool in pharmaceutical nanotechnology.

Isothermal titration calorimetry (ITC) is a technique for evaluating the thermodynamic profiles of connection between two molecules, allowing the experimental design of nanoparticles systems with drugs and/or biological molecules. Taking into account the relevance of ITC, we conducted, therefore, an integrative revision of the literature, from 2000 to 2023, on the main purposes of using this technique in pharmaceutical nanotechnology. The search were carried out in the Pubmed, Sciencedirect, Web of Science, and Scifinder databases using the descriptors "Nanoparticles", "Isothermal Titration Calorimetry", and "ITC". We have observed that the ITC technique has been increasingly used in pharmaceutical nanotechnology, seeking to understand the interaction mechanisms in the formation of nanoparticles. Additionally, to understand the behavior of nanoparticles with biological materials (proteins, DNA, cell membranes, among others), thereby helping to understand the behavior of nanocarriers in vivo studies. As a contribution, we intended to reveal the importance of ITC in the laboratory routine, which is itself a quick and easy technique to obtain relevant results that help to optimize the nanosystems formulation process.

The PTB water calorimeter for determining the absolute absorbed dose to water in ultra-high pulse dose rate electron beams.

Objective. The purpose of this investigation is to establish the water calorimeter as the primary standard in PTB's ultra-high pulse dose rate (UHPDR) 20 MeV reference electron beams.Approach. The calorimetric measurements were performed at the PTB research linac facility using the UHPDR reference electron beam setups that enable a dose per pulse between about 0.1 Gy and 6 Gy. The beam is monitored by an in-flange integrating current transformer. The correction factors required to determine the absorbed dose to water were evaluated using thermal and Monte Carlo simulations. Measurements were performed with different total doses delivered per pulse by modifying the instantaneous dose rate within a pulse and by changing the pulse length. The obtained temperature-time traces were compared to the simulated ones to validate the thermal simulations. In addition, absorbed-dose-to-water measurements obtained using the secondary standard alanine dosimeter system were compared to measurements performed with the primary standard.Main results. The simulated and measured temperature-time traces were shown to be consistent, within combined uncertainties, with one another. Measurements with alanine dosimeters proved to be consistent withink= 1 of the total combined uncertainty with the absorbed dose to water determined using the primary standard.Significance. The total relative standard uncertainty of absorbed dose to water determined using the PTB water calorimeter primary standard in UHPDR electron beams was estimated to be less than 0.5%, and the combined correction factors were found to deviate from 1 by less than 1% for both PTB UHPDR 20 MeV reference electron beams. The water calorimeter is therefore considered to be an established primary standard for the higher energy UHPDR reference electron beams.

Direct Oral FXa Inhibitors Binding to Human Serum Albumin: Spectroscopic, Calorimetric, and Computational Studies.

Direct FXa inhibitors are an important class of bioactive molecules (rivaroxaban, apixaban, edoxaban, and betrixaban) applied for thromboprophylaxis in diverse cardiovascular pathologies. The interaction of active compounds with human serum albumin (HSA), the most abundant protein in blood plasma, is a key research area and provides crucial information about drugs' pharmacokinetics and pharmacodynamic properties. This research focuses on the study of the interactions between HSA and four commercially available direct oral FXa inhibitors, applying methodologies including steady-state and time-resolved fluorescence, isothermal titration calorimetry (ITC), and molecular dynamics. The HSA complexation of FXa inhibitors was found to occur via static quenching, and the complex formation in the ground states affects the fluorescence of HSA, with a moderate binding constant of 104 M-1. However, the ITC studies reported significantly different binding constants (103 M-1) compared with the results obtained through spectrophotometric methods. The suspected binding mode is supported by molecular dynamics simulations, where the predominant interactions were hydrogen bonds and hydrophobic interactions (mainly π-π stacking interactions between the phenyl ring of FXa inhibitors and the indole moiety of Trp214). Finally, the possible implications of the obtained results regarding pathologies such as hypoalbuminemia are briefly discussed.

Interaction of an anticancer benzopyrane derivative with DNA: Biophysical, biochemical, and molecular modeling studies.

BACKGROUND: SIMR1281 is a potent anticancer lead candidate with multi- target activity against several proteins; however, its mechanism of action at the molecular level is not fully understood. Revealing the mechanism and the origin of multitarget activity is important for the rational identification and optimization of multitarget drugs. METHODS: We have used a variety of biophysical (circular dichroism, isothermal titration calorimetry, viscosity, and UV DNA melting), biochemical (topoisomerase I & II assays) and computational (molecular docking and MD simulations) methods to study the interaction of SIMR1281 with duplex DNA structures. RESULTS: The biophysical results revealed that SIMR1281 binds to dsDNA via an intercalation-binding mode with an average binding constant of 3.1 × 106 M-1. This binding mode was confirmed by the topoisomerases' inhibition assays and molecular modeling simulations, which showed the intercalation of the benzopyrane moiety between DNA base pairs, while the remaining moieties (thiazole and phenyl rings) sit in the minor groove and interact with the flanking base pairs adjacent to the intercalation site. CONCLUSIONS: The DNA binding characteristics of SIMR1281, which can disrupt/inhibit DNA function as confirmed by the topoisomerases' inhibition assays, indicate that the observed multi-target activity might originate from ligand intervention at nucleic acids level rather than due to direct interactions with multiple biological targets at the protein level. GENERAL SIGNIFICANCE: The findings of this study could be helpful to guide future optimization of benzopyrane-based ligands for therapeutic purposes.

Expression and Characterization of Intein-Cyclized Trimer of Staphylococcus aureus Protein A Domain Z.

Staphylococcus aureus protein A (SpA) is an IgG Fc-binding virulence factor that is widely used in antibody purification and as a scaffold to develop affinity molecules. A cyclized SpA Z domain could offer exopeptidase resistance, reduced chromatographic ligand leaching after single-site endopeptidase cleavage, and enhanced IgG binding properties by preorganization, potentially reducing conformational entropy loss upon binding. In this work, a Z domain trimer (Z3) was cyclized using protein intein splicing. Interactions of cyclic and linear Z3 with human IgG1 were characterized by differential scanning fluorimetry (DSF), surface plasmon resonance (SPR), and isothermal titration calorimetry (ITC). DSF showed a 5 ℃ increase in IgG1 melting temperature when bound by each Z3 variant. SPR showed the dissociation constants of linear and cyclized Z3 with IgG1 to be 2.9 nM and 3.3 nM, respectively. ITC gave association enthalpies for linear and cyclic Z3 with IgG1 of -33.0 kcal/mol and -32.7 kcal/mol, and -T∆S of association 21.2 kcal/mol and 21.6 kcal/mol, respectively. The compact cyclic Z3 protein contains 2 functional binding sites and exhibits carboxypeptidase Y-resistance. The results suggest cyclization as a potential approach toward more stable SpA-based affinity ligands, and this analysis may advance our understanding of protein engineering for ligand and drug development.

Microcalorimetric growth behavior of E. coli ATCC 25922 in an MCDSC.

Isothermal microcalorimetry can provide a general analytical tool for the characterization of bacterial growth. Methodologies and equipment have been studied to expand the application and disseminate the use of the technique. The MCDSC is a microcalorimeter capable of measuring in the range of 0.2 µW that can operate at a temperature range of -20 to 140 °C or under isothermal conditions. Here, we present the first investigation of MCDSC for E. coli growth with the Baranyi and Roberts modeling application. This study presented the calorimetric E. coli fingerprint at MCDSC and compares it with the plate count technique, giving the data more biological meaning. The calorimeter was able to accurately detect growth metabolism and discriminate E. coli at different inoculum densities. Additionally, the MCDSC can offer a new point of view for evaluating microbial growth, such as the significant reduction in error due to dispersed data by the viable counting method.

A standardized method for genus Colletotrichum characterization by isothermal microcalorimetry using thermokinetic parameters.

A new standardized method, using isothermal microcalorimetry (IMC), was established to determine thermokinetic parameters from heat flow curves and to demonstrate the reproducibility and repeatability of the parameters of five Colletotrichum species on different days. Measurements on IMC were made at different periods and by two operators. Repeatability and reproducibility (R&R) measurement system analysis was performed on the technique used to measure the heat flow of Colletotrichum strains. The results showed that the %GageR&R was found to be within the acceptable ranges of a measurement system. Also, the parameters obtained from the curves were subjected to a combination of Principal Component Analysis (PCA) and Clustering, the data showed that the total heat (Ht) and maximum growth rate (µmax) are probably the most specific distinguishing characteristic of the strains evaluated in this study. This study demonstrates, for the first time, the usefulness of IMC in obtaining heat flow curves and thermokinetic parameters, providing repeatable and reproducible measurements over a period and under controlled conditions, for future identifications of phytopathogenic fungi.

Hyaluronan-cecropin B interactions studied by ultrasound velocimetry and isothermal titration calorimetry.

Interactions between hyaluronan and the antimicrobial peptide cecropin B were studied in water and PBS using high-resolution ultrasonic spectroscopy and isothermal titration calorimetry. Although each technique is fundamentally different, they both gave identical results. It was found that the molecular weight of hyaluronan plays an important role in the interactions - in particular, the transition between the rod conformation and the random coil conformation. In water, interactions were saturated in a molar charge ratio of 1.5 and not 1.0 as expected. The later saturation of the interaction probably occurred either for steric reasons or due to the interaction between functional groups in the cecropin structure, which allowed complete dissociation of the antimicrobial peptide. In PBS, in contrast to water, no interactions were observed, irrespective of the molecular weight of hyaluronan. Thus, at a sufficiently high ionic strength, the interactions were suppressed.

Isothermal Titration Calorimetry Analysis of a Cooperative Riboswitch Using an Interdependent-Sites Binding Model.

Isothermal titration calorimetry (ITC) is a powerful biophysical tool to characterize energetic profiles of biomacromolecular interactions without any alteration of the underlying chemical structures. In this protocol, we describe procedures for performing, analyzing, and interpreting ITC data obtained from a cooperative riboswitch-ligand interaction.